Alpha Technologies Services, Inc. | 3767 Alpha Way, Bellingham, WA 98226, USA
Tel.: Toll Free North America: +1 800 322 5742 | Outside US: +1 360 647 2360 | Technical Support: +1 800 863 3364
For more information visit our website at: www.alpha.com
© 2021 Alpha Technologies Services, Inc. All Rights Reserved. Trademarks and logos are the property of Alpha
Technologies Services, Inc. and its affiliates unless otherwise noted. Subject to revisions without prior notice. E.&O.E.
NO-OX
®
is a registered trademark of Mind Head LLC. MIDTRONICS
®
is a registered trademark of Midtronics, Inc.
CELLTRON
®
is the registered mark of Celltron, Inc. DOCSIS
®
is a registered trademark of Cable Television Laboratories, Inc.
017-947-B1-001, Rev. A1 (08/2021)
8.0 Mounting Options
Alpha
®
offers a variety of mounting options for the XM3.1-HP 3 and 5 Amp models. For further installation details please
consult the XM3.1-HP Technical Manual for 3 & 5 Amp Models
(Alpha p/n 017-947-B0-001)
and/or specific rack/enclosure
manuals:
Mounting Options
Supplementary Reference
Material
Wall-Mount Rack (1 Battery)
017-947-B0-001
or
746-221-C0-001
Wall-Mount Rack (2 Battery)
Wall-Mount Shelf (Large)
Node Power Supply Enclosure
031-295-B0-001
LPE Enclosure
031-302-B0-001
Table 8-1, Mounting Options
7.0 Final Verification
7.1 Local Web Server Access
By means of the installed CMM, the enabled Ethernet port of the Alpha
®
DOCSIS
®
Transponder can be used as a local
connection point, allowing the user to connect to the transponder web page. To access the web page, follow the steps
below:
1. Using a standard (CAT5 or better) Ethernet cable, connect the transponder to the laptop or computer network
interface port.
2. Launch a web browser.
3. Enter the transponder’s default IP address
(192.168.100.1)
into the web browser’s address field.
4. The transponder’s web server home page will appear.
A Static IP address (192.168.100.2) may need to be set on your network interface card to
connect to the transponder.
NOTICE:
For the Alpha DOCSIS Transponder, this may take up to 45 seconds when the transponder is
initially powered up with no RF connection.
NOTICE:
7.2 Remote Web Server Access
To remotely access the Alpha DOCSIS
Transponder web server utilizing a web browser:
1. Open a web browser on a computer
connected to the same network as the
XM3.1-HP.
2. Enter the Alpha DOCSIS Transponder’s
designated IP address (e.g., 192.168.1.124)
into the web browser address field.
3. The Alpha DOCSIS Transponder’s web
server home page will appear.
Fig. 7-1, XM3.1-HP Overview Web Page
(Data values shown are for illustrative purposes only.)
