Alpha Technologies GDI Bell, Руководство пользователя и программирования

Страница: 27 / 40

26
CAL AT+CPBR=x Info about number saved on position x
CAL AT+CCLK=”<time>“ Setup time in GDI <time>
Format <time>=
yy/MM/dd,hh:mm:ss±zz
yy – year (00-99)
MM – month (01-12)
dd – day (01-31)
hh – hours (00-23)
mm – minutes (00 – 59)
ss – seconds (00 – 59)
±zz – time zone (-47..+48) hours
Command types:
READ
– command for reading parametres as same as phone
numbers from SIM card
CLR
– command to erase phone numbers from SIM card.
CAUTION! When you use SMS for numbers erasing then dont
forget that one ADMINx number must stayed
– otherwise
remote settings will not be possible (neccessary to make new
initialization).
INIT
– Initialization. During first setting when SIM doesnt
includes any ADMINx number is neccessary to put such
number on the SIM card.It is done by SMS with INIT
command. The SMS might be sent from various number.
When SIM card already has at least one number with name
ADMINx the command is ignored.
WRITE
– command to save parametres as same as phone
numbers to SIM card
CAL
–
after command CAL you can put various AT command
of used GSM module (for example: module reset, time setting
etc.) .
Those commands please use with appropriate
knowledge only! It can caused blocking of whole unit!