Alpha Technologies GDI Bell, Руководство пользователя и программирования

Страница: 26 / 40

25
WRITE PAR RL1TMON:y Relay1 activation time after ringing in or by
code yy seconds
y=0-9
03
WRITE PAR RL1RING:x
Relay1 activation by ringing in
x=0 – OFF
x=1 – ON
1
WRITE PAR RL2COD:yy
Code for relay2 activation during call
yy= 00-99
6
WRITE PAR RL2MOD:x Relay 2 modes
x=0 – control by SMS
x=1 – switch mode (ringing in only from
SIM phone number or by code)
x=2 – camera mode (activated by pick up,
deactivated by hang up)
x=3 – lighting mode (activated by pick up
and stays ON for „activation time“
after hang up
x=4 – activated for „activation time“ after
button press
x=5 - switch mode all (ringing in from all
phone number or by code)
0
WRITE PAR RL2TMON:yy Relay2 activation time after ringing in or by
code yy seconds
yy=00-99
05
WRITE PAR RL2RING:x Relay2 activation by ringing in
x=0 – OFF
x=1 - ON
0
WRITE A420cc..c
Savings of number for SMS „ALARM ON“
(input grounding)
WRITE AL420cc..c
Savings of number for SMS „ALARM
OFF“
(input disconnection)
CAL AT+CSQ
Signal strength level