manualshive.com logo in svg

Alpha Technologies CFR 1500, Руководство оператора

Поделиться
Скачать
Alpha Technologies CFR 1500 Скачать руководство пользователя страница 7

1

1.1

The Alpha CFR

Congratulations on your purchase of one of the most advanced and

intelligent Controlled Ferroresonant-Uninterruptible Power Supply (CFR-UPS) in the
world!  The Alpha CFR is designed to keep your equipment operating, regardless of
the condition of your utility  power.  This means that your vital equipment will no
longer be affected by spikes, surges, sags, noise, brownouts, blackouts or other
forms of electrical disturbances.  Operation is as simple as plugging your equipment
into the back of the UPS and switching on the power.

The CFR provides you with a wide range of power management options

using your choice of interface devices.  The Standard Interface Device displays
vital UPS operating parameters, including Alarms, and allows you to manually
self-test the UPS.  The Intelligent Interface Device (IID) provides you with precise
Voltage, Current and Frequency information, plus maintains an on-going record of
all Alarm and Line Failure Events.  As an active center of communication, your
CFR can also be interfaced directly to your computer system to inform you, and
your users, of changes in status as they occur.

 With distribution networks and service centers located throughout the world,

Alpha Technologies is here to back you up.  From your date of purchase, Alpha
provides complete technical support and prompt, reliable service to ensure that
your CFR-UPS provides you with a lifetime of reliable operation.

1. INTRODUCTION

The Alpha CFR-UPS provides regulated, current-limited,

output with excellent isolation and noise attenuation

72

6.8

Repair Instructions

Before returning a unit to Alpha Technologies for repair, a Return Material

Authorization (RMA) should first be obtained from Alpha's Customer Service
Department.  The RMA number should be clearly marked on the unit’s original
shipping container.  If the original container is no longer available, the UPS should
be packed with at least 3 inches of shock-absorbent material.  Note: Do not use
popcorn-type packing material.  Returns should be prepaid and insured (COD and
freight collect can not be accepted).

ALPHA TECHNOLOGIES DOES NOT ASSUME RESPONSIBILITY FOR
DAMAGE CAUSED BY THE IMPROPER PACKAGING OF RETURNED UNITS.

6.9

Parts and Ordering Instructions

To order parts, contact the Alpha Technologies Customer Service

Department directly at:

United States

(360) 647-2360

Canada

(604) 430-1476

United Kingdom

+44-1279-422110

Germany

+49-9122- 997303

Middle East

+357-5-375675

Australia

+61 (0)2 9894-7866

TO OBTAIN COMPLETE TECHNICAL SUPPORT

(7 DAYS / WEEK, 24 HOURS / DAY)

CALL

 1 - 8 0 0 - 3 2 2 - 5 7 4 2

(USA)

 1 - 8 0 0 - 6 6 7 - 8 7 4 3

(Canada)

6. MAINTENANCE

Содержание CFR 1500




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды