AM-6000 Service Manual
Page 3
Rev. A02
TO REMOVE THE TOP COVER,
REMOVE THESE TWO SCREWS.
TOP COVER
LOCKING TABS
TO REMOVE THE SIDE COVER,
REMOVE THESE FOUR SCREWS.
Figure 3: AM-990 Chassis Removal
4.
Once the top cover slides forward, pull straight up to remove it.
To remove the side panel:
1.
Remove the four screws that secure the left side panel to the chassis.
2.
Using the palm of your hand, firmly strike the rear edge of the side panel.
3.
Once the panel slides forward, it can be removed by lifting straight up.
ELECTRONIC EQUIPMENT HANDLING PRECAUTIONS
With the AC power cord unplugged and the top cover removed, the components inside your computer are
vulnerable to damage caused by static discharge. Your body and clothing can store an electrical charge
that can damage or destroy unprotected electronic components. Before handling any computer hardware,
make sure your work area is properly protected against static discharge. There are a number of
commercially available static protection devices, like the wrist strap shown in Figure 4, designed
specifically to protect your equipment from harmful static discharge.
