Alpha-InnoTec LW 140A, Руководство по эксплуатации

Страница: 8 / 44

8
Subject to change without notice | 83054200iUK | ait-deutschland GmbH
15 Scope of delivery
Packing unit 1:
Air flow baffles (quantity of 2, each in a
separate box)
Packing unit 2:
Basis unit with fully hermetically enclosed
compressor, all safety-related components
for monitoring of cooling circuit and hose for
condensate discharge (connected on heat pump
side).
1. Inspect delivery for outwardly visible signs of
damage.
2. Check to make sure that delivery is complete.
Any defects or incorrect deliveries must be
claimed immediately.
NOTE
Note the model.

“Technical data / scope of delivery“, from
page 22
Accessories necessary for operation
IMPORTANT
Use only original accessories from the manu -
facturer of the unit.
Heating and heat pump controllers, as wall-mounted
controllers or integrated in the hydraulic tower (for out -
put range 14 – 18kW), as well as control and sensor
cables, are functionally necessary accessories, which
you must order separately.
The heat pump is a functioning unit only with the heat
-
ing and heat pump regulator and the control and sen -
sor wires.
Heating and heat pump regulator
(for wall mounting)
Control and sensor wires are available in various
lengths, as required.
Additional accessories
You must order separately:
● installation accessories (vibration decouplers)
for air/water outdoor installation heat pumps
● air / magnetic sludge separator