Alpha-InnoTec LW 140A Скачать руководство пользователя страница 4

4

Subject to change without notice  |  83054200iUK  |  ait-deutschland GmbH

3  Intended use

The unit may be used only for the intended use. This 

means:

 

● for heating.

 

● for heating hot water.

The unit may be operated only within its technical pa

-

rameters.

  “Technical  data / scope  of  delivery“,  from 

page 22

 NOTE

Notify the responsible power supply company 

of the use of a heat pump or heat pump sys

-

tem.

 

CAUTION

The unit is not suitable for use in IT network 

systems.

Exclusion of liability

The manufacturer will not be liable for damage result

-

ing from unauthorized use of the unit.
The manufacturer’s liability will also be voided in the 

following cases:

 

● if work is performed on the unit and its compo

-

nents in a manner that does not comply with the 

terms of this operating manual;

 

● if work is performed on the unit and its compo

-

nents in an improper manner;

 

● if work is performed on the unit that is not de

-

scribed in this operating manual, and this work 

was  not  expressly  approved  in  writing  by  the 

manufacturer;

 

● if the unit or components in the unit are modi

-

fied, redesigned or removed without the express 

written permission of the manufacturer.

EC conformity

The unit bears the CE mark of conformity.

  “EC declaration of conformity”, page 43

Safety

The unit is safe to operate when used for its intended 

purpose.  The  construction  and  design  of  the  unit 

conform  to  current  state-of-the-art  standards,  all 

relevant  DIN/VDE  regulations  and  all  relevant  safety 

regulations.
The operating manuals supplied with the product are 

intended for all users of the product.
The operation of the product via the heating and he

-

at pump control and work on the product which is in

-

tended for end customers / operators is suitable for all 

age groups of persons who are able to understand the 

activities and the resulting consequences and can car

-

ry out the necessary activities.
Children and adults who are not experienced in hand

-

ling the product and do not understand the necessa

-

ry activities and the resulting consequences must be 

instructed  and,  if  necessary,  supervised  by  persons 

experienced in handling the product and who are re

-

sponsible for safety.
Children must not play with the product.
The product may only be opened by qualified personnel.
All instructional information in this operating manual is 

solely directed at qualified, skilled personnel. 
Only  qualified,  skilled  personnel  is  able  to  carry  out 

the work on the unit safety and correctly. Interference 

by  unqualified  personnel  can  cause  life-threatening 

injuries and damage to property.

 

► Ensure that the personnel is familiar with the  local 

regulations, especially those on safe and hazard-

aware working.

 

► Only  allow  qualified  personnel  with  “electrical” 

training  to  carry  out  work  on  the  electrics  and 

electronics.

 

► Only  allow  qualified,  skilled  personnel  to  do  any 

other work on the system, e.g.

 

● Heating installer

 

● Plumbing installer

 

● Refrigeration  system  installer  (maintenance 

work)

Every person who carries out work on the unit must 

comply  with  the  applicable  accident  prevention  and 

safety  regulations.  This  applies  in  particular  to  the 

wearing of personal protective clothing.

Содержание LW 140A













































Отзывы: