Alpha-InnoTec 10078702, Руководство по эксплуатации

Страница: 9 / 36

9
Subject to change without notice | 83031300dUK | ait-deutschland GmbH
2. Remove lower facing panels on the fan side of the
unit. To do so, loosen quick-release screws. Turn
counter-clockwise 90°.
Pull lower facing panel upwards and outwards,
detach and set securely to the side.
3. Remove the screws located on the lower side of
the upper facing panel.
Slant the facing panel upwards, remove and set
aside in a safe place.
4. Then remove side facing panels from the unit too
and store safely.
Example: Removing the lower facade on the
operating side
Example: Removing the upper facade on the
operating side
5. At the fan, thread the two guide rods supplied
through the metal tab and fan.
6. Then, on both sides, hook the guide rods in the
keyhole slot pattern of the upper metal tab inside
the unit.
7. On the inside of the device, undo all four nuts
(M12) of the fan’s connections and remove togeth-
er with the spring washers.