Alpha ESS Storion-SMILE-B3 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 46

background image

`

___________________________________________________________________

Alpha ESS Co., Ltd.

Page 31 of 46

Your Smart Energy

Installation

Note: please pay attention to the CTs direction.

In AC system the both two meter addresses should be set, please refer to 2.4.5.5.2.

2.4.5.4 Mixed Installtion of CT and Meter

A CT and a three-phase meter (ADL3000, ALD3000 with CT, ACR10R with CT) can be installed in the
same system, the CT and the meter shall be installed according to the corresponding position, otherwise
the system will run abnormally.

The initial setup is CT connection. If a meter is connected, after connecting, a relevant configuration
work shall be carried out by

the installer

on AlphaCloud, please refer to 5.1.2.

NOTE: This function is released in SMILE-B3 EMS firmware version V1.00.33 or above.

In AC system and the mixed installation of CT and meter situation, the meter address should be
also set in the meter, please refer to 2.4.5.5.1 (ADL3000) and 2.4.5.5.2 (ACR10R).

2.4.5.5 Meter setting

2.4.5.5.1 ADL3000

Step 1: The initial interface of the meter
(normal working interface) is as shown
below:

Step 2: Click the “SET” button to enter the
password interface:

Step 3: Click the "Enter" button to enter the
following interface, and press the up and
down arrow keys to enter the password
0001;

Step 4: Click the "Enter" button and the
password input is completed.

Step 5: Click the “Enter” button again to enter
the address interface:

Step  6:  Click  the  “Enter”  button  to  enter  the
following interface, press the up and down arrow
keys  to  set  the  meter  address,  the  Grid  meter
(DC, AC  and  Hybrid  system)  address is  set  to
001, and the PV meter (AC and Hybrid system)
address is set to 002.

«
...
31
32
33
34
35
...
»

Содержание Storion-SMILE-B3















































Отзывы:

Нет отзывов

Похожие инструкции для Storion-SMILE-B3

Бренд: SanDisk Страницы: 44

StoraXe PowerBooster GSS0608

Бренд: ADS-tec Страницы: 140

Бренд: Chieftec Страницы: 18

Aeon J460 M2 JBOD

Бренд: Netberg Страницы: 67

Бренд: AA Products Страницы: 2

Бренд: LaCie Страницы: 26

SPINPOINT MP2 HM080HJ

Бренд: Samsung Страницы: 1

SPINPOINT HS120JR

Бренд: Samsung Страницы: 1

SPINPOINT HS08XJF

Бренд: Samsung Страницы: 1

Spinpiont F1 SERIES

Бренд: Samsung Страницы: 6

Бренд: Samsung Страницы: 81

Бренд: Samsung Страницы: 83

Бренд: Samsung Страницы: 98

SGH-Blast Series

Бренд: Samsung Страницы: 163

Бренд: Palmako Страницы: 47

Бренд: G-Technology Страницы: 33

Portable Hard Drive

Бренд: Verbatim Страницы: 90

Бренд: XtendLan Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды