Alpego DELTA Series Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 16

Alpego DELTA Series Скачать руководство пользователя страница 9

MANUALE DELTA

Old Cod.D02694

New Cod. MANT2010/00605 R.4

INSTALLATION

- 5

Copyright ©2009 della Alpego spa® - All rights are reserved. Reprinting or unauthorized use of this manual is strictly forbidden without written permission by Alpego spa

D02615

Indicates the need to switch off the tractor and
remove the ignition key during maintenance
operations

D02608

Indicates the danger of entanglement while
working on the cardan shaft. Do not approach
the shaft while it is rotating.

Q15A00531

The sticker depicts the compulsory PPE
(Personal Protective Equipment): coverall,
mask, earplugs, safety shoes, gloves

5. INSTALLATION

5.1. LIFTING

The  machine  should  be  lifted  and  transported  with
the  right  means,  suitable  for  its  weight,  and  by
personnel  trained  in  this  kind  of  work.    Hook  the
machine  in  the  points  shown  in  the  figure  and
proceed with transportation.  The loads should not be
lifted  by  more  than  200  mm  from  the  ground  while
carrying out these operations.

5.2. CONNECTING TO THE TRACTOR

The machine can be connected with category 2 and 3 hitches. It is important to check the weight on the axes. If necessary,
ballast the tractor front, above all if a machine is to be connected to the rear (rotating harrow or tiller).
Make sure that the tractor is suitable fore being coupled to the machine, then move closer towards it to connect the three points.
Switch off the motor, pull the handbrake on then get off the tractor and get ready to connect the three points.

«
...
7
8
9
10
11
...
»

Содержание DELTA Series

















Отзывы:

Нет отзывов