MANUALE DELTA
Old Cod.D02694
New Cod. MANT2010/00605 R.4
SAFETY PRECAUTIONS
- 3
Copyright ©2009 della Alpego spa® - All rights are reserved. Reprinting or unauthorized use of this manual is strictly forbidden without written permission by Alpego spa
3.2. TECHNICAL INFORMATION TABLE
model
tractor
power
KW
max. working
depth mm.
working
width
mm.
Transportatio
n width
mm.
weight
kg.
tractor
hitch
category
n. of
shanks
DELTA-250
73-135
250
2500
2300
390
2° - 3°
4
DELTA-300
88-161
250
3000
2750
467
2° - 3°
4
DELTA-400
88-161
250
4000
3800
680
2° - 3°
6
MAXIMUM WEIGHT THAT CAN BE APPLIED TO THE REAR 3 POINT HITCH KG. 1600
4. SAFETY PRECAUTIONS
4.1. SAFETY REGULATIONS
•
Read the user and maintenance manuals carefully before starting, using and carrying out maintenance on the equipment.
•
The producer cannot be held responsible for injury caused to people and animals or damage caused to things because the
safety regulations have not been observed by the user.
•
The machine cannot be used for purposes other than those expressly indicated in this manual.
•
Carefully examine the adhesive labels on the machine and make sure you follow their indications.
•
You should always wear clothes that protect the body with no hanging parts that could get stuck in moving components.
Remove watches, rings, necklaces, etc. that could cause injury in dangerous situations.
•
Always use the safety shoes recommended by current accident prevention regulations.
•
Always use working gloves when assembling the machine and carrying out maintenance.
•
When carrying out manoeuvres do not allow people or animals to enter the working area of the machine.
•
While working do not allow people, animals and other such things to approach the working range of the sods and stones that
are being thrown out by the machine.
•
Do not allow other people to get on the tractor when you are working on the machine.
•
You must always remain seated in the tractor driving seat. Only leave the driving seat when the handbrake has been pulled
on.
•
During working stops switch off the motor, place the machine on the ground and pull on the tractor handbrake.
•
Never work if the guards have been removed.
•
The cardan shaft guard should always be in good condition. It should be checked periodically and fixed with the chains to
stop its rotation.