Alpego DELTA Series Скачать руководство пользователя страница 10

Страница: 10 / 16

MANUALE DELTA

Old Cod.D02694

New Cod. MANT2010/00605 R.4

INSTALLATION

- 6

To connect the lower arms, follow the instructions below and refer
to the drawing on the right:

a) Remove screws A and bolts B.

b) Remove pins C

c) Insert the detent into the spaces D

d) Reposition the pins C the screws A and the bolts B. Select the
most suitable hole for the tractor lifting capacity

e) use the same procedure to place the third point tie rod, which is
on the tractor, into hole E.

5.3. POSITIONING CATEGORY 2 OR 3 HITCHES

The machine has category 2 and 3 connections. The
connecting pins should be positioned as shown in the
figure, and in accordance with the tractor connection
category.

Follow all the safety instructions given in paragraph 4 of this manual, and carefully read the
documentation that tells you how to use the tractor.

When the machine has been connected to the tractor, activate lifting then get ready to couple it
with a rotating harrow or a tiller.

Содержание DELTA Series

















Результаты поиска

Содержание DELTA Series

Отзывы:

Alpego DELTA Series, Руководство по эксплуатации и обслуживанию, Страница: 10 / 16

Результаты поиска

Содержание DELTA Series

Отзывы: