I_505_Aloxy Pulse Instruction Manual EN
31
34
UV resistance
Chamber temperature 35-45°C
Black standard temperature: 65°C
Intensity 0,5W/m² (340nm)
Radiation dose 2,900Mj/m²
Rain cycle 102:18
Test duration:
After 0, 800, 1,600 and 3,200 hours exposed to UV (carousel) / weathering, the colour of the
material is measured and expressed in the following scheme: L*a*b*:
L* (Brightness): 0 = black, 100 = white
a* (Colour): + = increased red, - = increased blue/green
b* (Colour): + = increased yellow, - = increased blue/purple
As the unexposed material is yellow, the value b* and L* are high. Tests show that weathering
lowers b*, which is a typical reaction of the material under UV light (material tends to become
yellowish with reduced “shining”), however, this effect is only minimal as the Aloxy material is
already yellow. The material came from a bright colour to a more fade tone on the Greyscale of 2.5.
After testing there is no oil bleed out, no stickiness and no blooming after 3,200 hours of aging. As
expected, there appear slight surface cracks, however the material stays intact with minimal impact
on the shore.
Tested by supplier
according to DIN EN ISO
4892-2
Battery
(replaceable)
Reference
T36851CCC
Lithium Metal battery with
supercap
3,6V - 8500mAh
Custom made
E36850CCC
Lithium Metal battery without
supercap
3,6V - 8500mAh
Custom made
E36851CCC
Lithium Metal battery with
supercap
3,6V - 8500mAh
Custom made
Authonomy
DASH7
5 to 8 years
ALOXY_MVP_001_Battery
consumption
LoRaWAN
SF7
5 to 6 years
