DEHUMIDIFIERS
The screws
Electrical
control box
※
Storing Your Dehumidifier
※
If the unit will be stored for an extended period of time:
1. Turn unit off and allow to dry.
2. Manually drain pump reservoir.
3. Wrap and secure the power cord .
4. Clean the filter mesh.
5. Store in clean,dry environment.
※
Troubleshooting
※
Solution
Trouble
cause
Filter mesh jammed
Clean the filter
Machine Won’t Work/
Display is Blank
Clean the filter
Display Blank. Power outage
or poor connection
Room temperature whether in
5
℃~
35
this inner?
℃
Check Power Supply
Check both ends of power
cord for good connection
Cannot start the
dehumidifier
Filter mesh is clogged
Air inlet or outlet jammed
Clear the blockage from
air inlet or air outlet
No Airflow
Unit is not level
Place unit on flat surface
in vertical orientation
Place unit on flat surface
in vertical orientation
Loud/Unusual Noise
-1
3
-
Trouble code:E1
Loud/Unusual Noise
Humidity Sensor or
communication error
Check sensor cable is properly
connected.Replace the Senser
The water tank float tank
drained or re-install the
float switch normal conntact
Water Full Protection
Trouble code E4
:
Trouble code L0
:
Trouble code HI
:
Trouble code
HI
:E1.L0.
Filter mesh jammed
Clean the filter
Unit sensing room temperature
below 33
°
F
Unit sensing room temperature
above 100
°
F
Increase room temperature
Check Sensor
Check Sensor Cable
Decrease room temperature
Check Sensor
Check Sensor Cable
Shows E1, L0,HI at the same time
indicated a bad connection, cable
or sensor
Check Cable connection
Replace Cable
Replace Sensor
DEHUMIDIFIERS
-1
4
-
