ALMAC Athena 870-BL EVO, Перевод оригинальной инструкции

Страница: 36 / 180

PAGE
36 ALMAC s.r.l.
2.12 Safety regulations during maintenance
The maintenance operations described in this Manual refer to platforms in
conditions of normal use. In heavy duty use conditions (e.g. extreme
temperatures, dust and corrosive substances in the environment, etc.), inform
the ALMAC S.r.l. assistance services to have the maintenance intervals checked
and changed.
The MAINTENANCE operations must only be performed by authorized and
adequately trained personnel.
Only perform the MAINTENANCE and ADJUSTMENT operations described in this
Manual. Contact the ALMAC S.r.l. assistance service only, if other operations are
required (e.g. if faults occur).
All MAINTENANCE work must be performed in compliance with the laws in force
governing safety and protection of the environment.
THE MANUFACTURER IS RELIEVED FROM ALL LIABILITY FOR ACCIDENTS OR FAULTS
DUE TO FAILURE TO COMPLY WITH THE RECOMMENDATIONS AND SAFETY
REGULATIONS.
•
Proceed with maintenance operations only after turning off the machine and
deactivating the battery disconnect switch.
•
Before proceeding with the interventions, make sure the platform is
completely blocked.
•
If the work platform must be raised for maintenance purposes, the platform
and lifting structure must be prevented from accidentally lowering. To do
this, there is a device on the lift arm that must be set in a precise position so
as to immobilize the scissor structure (see procedure described below).
The MEWP is equipped with two devices on the sides of the pantograph.
WARNING: It is mandatory to position both devices before performing any
operation in the machine.