ALMAC Athena 870-BL EVO, Перевод оригинальной инструкции

Страница: 128 / 180

PAGE
128 ALMAC s.r.l.
6.2.10.2 Replacement of return filter
To replace the discharge filter (2) located above the hydraulic tank, proceed as
follows:
1) Arrange the machine with the extending structure lifted and block it with
the special mechanical locks for maintenance. Now turn it off and
deactivate the electric panel
2) Unscrew the blocking screws ( 4 ) on the filter and remove it from its
housing
3) Unscrew the filter cartridge ( 5 ). Take care of the seals and/or O-rings.
4) Remove the cartridge ( 6 ) and fit a new one in its place.
5) Work through the instructions above in reverse order to restore the
machine to its normal operating conditions.
Warning: during operations some oil could spill. Remove spilt oil with a cloth or
place a vessel underneath so that the oil drains into it.
ONLY USE GENUINE SPARE PARTS when replacing the filters. Contact the
ALMAC technical assistance service.
Do not reuse used oil. Do not dispose of it in the environment. Used oil must
be disposed of as required by the laws in force.