Alltech 25L100, Руководство оператора

Страница: 20 / 65

KEENAN MechFiber 250 and
280 Operator’s Manual
20
Revision C01, 04 th Dec 2019
7.5 Operating the KEENAN mixer wagon
Table 2: Loading the KEENAN Mixer Wagon
LOADING THE KEENAN MIXER WAGON
GENERAL
• Park on level ground.
• Ensure variable feed control door (VFC) is closed.
• Do not start PTO when VFC-door is open.
LOADING AND MIXING SEQUENCE
• Load feed as close as possible to the loading side of the unit.
• Load concentrate feeds along the length of the machine.
• Load forages to the front, back and centre of the unit in alternate grabs during mixing.
• Remove all twine, wrap or polythene from bales.
• Round or square bales should be split or broken into four pieces
minimum.
Use front grab or forks as required.
• Stop PTO before moving to feed out area.
• Mixing time will depend on chop length required.
Below is a guide to the correct loading order. Consult your local InTouch
office/nutritionist for best loading order for your ingredients.
Order Feed Ingredients Paddle RPM Tractor Engine
Speed
1st Straw, Hay
All at 6
–8 RPM
1,400
–1,600 RPM
2nd Water, Liquid Feeds
3rd Minerals, Concentrates, Protein
Meals, Pulps, Cereal Grains
4th Grass Silage
5th Maize Silage