ALLPOWER EPW2000, Руководство пользователя

Страница: 12 / 24

12 | ALL POWER™ EPW2000 POWER WASHER www.allpoweramerica.com
12 CLEAN-UP AND STORAGE | OWNER’S MANUAL
Shutting Down the Pressure Washer
When Finished Using The Pressure Washer,
Follow These Steps To Shut Down The Unit:
• Turn the pressure washer to the OFF
position.
• Turn off the water supply.
• Before disconnecting high-pressure
hose connection, point the gun in a safe
direction and discharge the high-pressure
water.
• Disconnect high-pressure hose from the
pressure washer and gun.
• Disconnect garden hose from the
pressure washer.
• Remove excess water from the pump by
tipping the unit on both sides to
drain any remaining water from inlet and
outlet fittings.
• Remove Water Intake Filter and flush with
water to remove dirt or debris. Return
filter once cleaned.
• Drain detergent reservoir and flush with
running water.
• Wipe away any remaining water on all
parts and fittings.
• Engage the gun safety lock.
• Store the pressure washer, parts, and
accessories in an area with a temperature
above 0°C (32°F).
4 1
CLEAN-UP AND STORAGE
Shutting Down the Pressure Washer
WHEN FINISHED USING THE PRESSURE WASHER,FOLLOW THESE
STEPS TO SHUT DOWN THE UNIT:
•
Turn the pressure washer to the OFF position.
•
Turn off the water supply.
•
Before disconnecting high-pressure hose connection, point the gun in a
safe direction and discharge the high-pressure water.
•
Disconnect high-pressure hose from the pressure washer and gun.
•
Disconnect garden hose from the pressure washer.
•
Remove excess water from the pump by tipping the unit on both sides to
drain any remaining water from inlet and outlet fittings.
•
Remove Water Intake Filter and flush with water to remove dirt or debris.
Return filter once cleaned.
• Drain detergent reservoir and flush with running water.
• Wipe away any remaining water on all parts and fittings.
•
Engage the gun safety lock.
•
Store the pressure washer, parts, and accessories in an
area with a temperature above 0°C (32°F).
1600 PSI Pressure Washer
(Fig 12)
Winterizing and Long-Term Storage
FOLLOW ALL OF THE ABOVE SHUT-DOWN
PROCEDURES, ADDING
THE FOLLOWING STEPS….
• After disconnecting the water supply, and
before disconnecting the high-pressure
hose, turn the pressure washer on for 2-3
seconds, until any remaining water in the
pump exits. Turn unit off immediately.
CONTINUED USE OF THE PRESSURE
WASHER WITHOUT WATER SUPPLY
ATTACHED WILL CAUSE SEVERE
DAMAGE TO THE UNIT!
• Always store the pressure washer, parts,
and accessories in an area with a
temperature above 0° C (32° F).
WARNING
Failure to comply with these storage instructions
will result in damage to the pump assembly.