ALLPOWER EPW2000, Руководство пользователя

Страница: 7 / 24

ALL POWER™ EPW2000 POWER WASHER | 7
Proper Use of The Pressure Washer
(cont’d)
2. Make sure that the water supply you use
for the pressure washer is not dirty, sandy,
and does not hold any corrosive chemical
products. Using a dirty water supply will
compromise the long life of the pressure
washer.
The pressure washer can be used for a variety
of applications including washing cars, boats,
patios, decks, garages etc. where high pressure is
necessary to remove dirt and debris. High-pressure
water flow can damage the work surface if not
used properly! See the section titled “Operation”
for more details. Always test the spray in an open
area first.
CAUTION
3. NEVER move the unit by pulling on the
high pressure hose. Use the handle
provided on the top of the unit.
4. Always hold the high pressure gun and
wand with two hands. Keep one hand on
the gun/trigger, while supporting the wand
with the other hand.
5. When dispensing detergent, the pressure
washer applies detergent to the cleaning
area at low pressure only. Once the
detergent has been applied, spray the
detergent off of the work area by using
the adjustable nozzle.
ASSEMBLY INSTRUCTIONS
(Fig 1)
Unpacking The Carton
After opening the carton, please remove all
parts and check them against the following
list of components that are included:
A. High Pressure Washer
B. Gun
C. High Pressure Hose
D. Adjustable Nozzle
E. Brass Connector
F. Water Intake Filter (Pre-Installed)
G. Detergent Bottle
(Fig 1)
OWNER’S MANUAL | ASSEMBLY 7