background image

·

Never use toxic or inappropriate substances to clean your aquarium, such 
as household or garden detergents.

IMPORTANT!

 

It is 

ESSENTIAL 

to

 

place the aquarium on the corresponding 

cabinet which was designed with the correct dimensions and structure to bear 
the weight of the aquarium full of water. 

Placing your tank on a different 

cabinet, piece of furniture, stand, etc.

 

WILL invalidate your warranty.

POSITIONING YOUR AQUARIUM

NOTE

 – Selecting a suitable location for your aquarium is very 

important.

·

This aquarium is suitable for indoor use only.

·

Position your aquarium away from direct sunlight to reduce excess algae 

build-up and prevent your aquarium from overheating. Locate your 
aquarium away from other draft and heat sources (air ducts, radiators, etc.) 
to help regulate and maintain a suitable temperature. Do not locate your 
aquarium in a location or on a surface where water spills will cause 
damage.

·

Position your aquarium close to an electrical outlet.

·

Make sure that your chosen location for your aquarium has an even and 

level surface which will be able to support the total weight of the 
aquarium and cabinet when filled with water. Once the tank is positioned, 
ensure that it is completely level by using an adequate spirit level.

·

NEVER insert any lining (e.g. polystyrene) between the cabinet and 

aquarium tank. Position the aquarium directly onto the cabinet without any 
additional support or cushioning in between.

IMPORTANT!

 

It is 

ESSENTIAL 

to

 

place the aquarium on the corresponding 

cabinet which was designed with the correct dimensions and structure to bear 
the weight of the aquarium full of water. 

Placing your tank on a different 

cabinet, piece of furniture, stand, etc.

 

WILL invalidate your warranty.

Содержание JY Series


















Отзывы: