AllPondSolutions JY Series, Инструкция по эксплуатации, Страница: 10 / 17

Connect the water outlet (12) to the hole in the
underside of the bottom filter tray (1). This allows
the filtered water to be returned into the tank.
Add the black bio balls (2) into the bottom filter
tray on top of the filter foam.
Lay the clear spray bar (6) across the top of the
top filter tray (6) between the two grooves at
either end. The black rubber end piece must sit in
the groove on the right hand side in order to
connect to the flex pipe (13).
Sit the filter box lid (14) on top of the top filter tray.
Carefully lay the glass cover (5) onto the top of the
tank rim. Position the filter trays and the LED light
unit (10) on top of the glass cover. Ensure that the
protective plastic wrap cover has been removed.
Position the switch and all cables to hang outside
the tank.
Replace the filter hood on top of the tank and
feed all cables through the pre-cut slit in the side
of the hood.
5
6
7
8