AllPondSolutions JY Series, Инструкция по эксплуатации, Страница: 14 / 17

rubbers stay in the holes that they fit into and will not be obviously evident
when first removing the impeller and shaft).
Note: Handle the ceramic shaft with care as this can break very easily during
the cleaning process.
Filter media is designed for use in filter bays and will help clean circulating
water and maintain essential bacteria.
Always rinse all media thoroughly prior to use until water runs clear to avoid
tank clouding.
We recommend to add media to your filter bays in the following order to give
complete and optimum filtration for your tank. Depending on the amount of
fish you are going to house in your tank, you may need to add additional
media to ensure your tank is filtered sufficiently.
Adding Filter Media
BOTTOM MEDIA
TRAY Filter Floss Foam
Bio Balls
Mechanic Filtration
Biological Filtration
Removes small
waste particles from
the water.
Creates environment
for nitro-bacteria to
cultivate and help
oxygenate the water.
TOP MEDIA TRAY Filter Floss Foam
IMPORTANT! Always use water from your fish tank to clean your filter media.
Do not use mains water or any cleaning products to clean your media.
Please remember to change your activated carbon at least every 2-3 months
as after this time it is possible that the carbon can have a negative effect on
your aquarium as the very waste it removes can be released from the carbon
back into the aquarium.
When cleaning mechanical or biological media, NEVER rinse with tap water or
use any soap or detergent, only your aquarium water. The best time to rinse
your filter foams, bio balls and ceramic rings through is when doing a 10 / 20%
water change as you can use this water to wash the media through.