4.1.1.2 Including controllers
The inclusion process is initiated by activating the include initiator on the Primary
Controller or Inclusion Controller and the include initiator on the new controller that
should be included into the network. The Primary Controller or Inclusion Controller will
assign Home ID and Node ID to the new controller, which will then automatically become
a Secondary or Inclusion Controller.
As part of the inclusion of additional controllers into the network, a replication of the
routing tables and optionally other information will automatically take place. This
ensures that the new controller has the newest information available. At later stages,
when the Primary Controller has been updated with new nodes (or nodes have been
deleted), a new replication can be initiated by activating the include initiators on both
controllers as desired above. This network information updating can also be done
automatically using the Static Update Controller functionality.
Factory Reset
To reset the Alloy SmartHome Hub to its factory settings, you will first need to remove all
devices. A
Factory reset
button will then become visible.
Pressing the
Factory reset
button will immediately reset the Hub. The Hub will reboot.
© 2020 Alloy SmartHome LLC All Rights Reserved
14
