Allnet ALL2285 Скачать руководство пользователя страница 59

Страница: 59 / 63

2.5

Pan Tilt

Under the tab <

Pan Tilt

>, there are submenus including: <Preset>,

<Sequence>, and <Pan/ Tilt Control>.

NOTE:

Pan Tilt function is only available for 10x/ 18x Zoom AF IP

Camera and Box Camera (DC12V/ AC24V/PoE Model).

With RS-485 support, the IP Camera is capable of working with a Pan Tilt Head

for pan and tilt control. Before implementing pan/tilt control, please ensure the
Pan & Tilt Head is correctly connected to the IP Camera’s RS-485 port.

Pin Definition for IP Camera’s RS-485 Port

6. D

－

7. D

＋

2.5.1 Preset

The Preset Setting can be found under this path:

Pan Tilt> Preset

NOTE:

Before setting this function, users must enable the Pan/ Tilt

Control first. Please refer to

Pan/ Tilt Control

for more details.

There are up to 127 preset points that can be set in the Preset setup page.

Please follow the steps below to set and run preset points.

Preset Points Setup

Step 1.

Move the camera to the desired position by moving the mouse cursor

onto the screen, one left click on mouse, and then dragging the red

arrow to pan/tilt. Users may adjust the zoom position as well.

Step 2.

Once a Preset Point is defined, please assign a number (between 1

and 127) and enter it into the input field.

Step 3.

Click on the <

√> button to save the defined preset point.

Содержание ALL2285
































































Результаты поиска

Содержание ALL2285

Отзывы:

Похожие инструкции для ALL2285

Бренды по названию

Популярные бренды

Allnet ALL2285, Руководство пользователя

Результаты поиска

Содержание ALL2285

Отзывы:

Похожие инструкции для ALL2285

Бренды по названию

Популярные бренды