Allnet ALL2285 Скачать руководство пользователя страница 29

Страница: 29 / 63

Triggered Action (Multi-option)

The Administrator can specify alarm actions that will take when motion is

detected. All options are listed as follows:



Enable Alarm Output

Check the item and select the predefined type of alarm output to enable

alarm relay output when motion is detected.



Record stream to SD Card

Select this item and the Motion Detection recording will be stored in

Micro SD/ SDHC card when motion is detected.

Pre-trigger buffer recording function allows users to check what

happened to cause the trigger. The pre -trigger buffer time range is from

1 to 3 seconds.

Select <Upload for __ sec> to set the recording duration after motion

event occurs. The setting range is from 1 to 99999 seconds.

Select <Upload during the trigger active> to record the triggered video

until the trigger is off.

NOTE:

Please make sure the local recording (with Micro SD/

SDHC card) is activated so that this function can be

implemented. Refer to

Recording

for further details.



Send Alarm

Message by FTP/E-Mail

The Administrator can select whether to send warning messages by

FTP and/or E-Mail when motion is detected.



Upload Image by FTP

Select this item and the Administrator can assign a FTP site and

configure various parameters. When motion is detected, event images

will be uploaded to the appointed FTP site.

<Pre-trigger buffer> function allows users to check what happened to

cause the trigger. The <Pre-trigger buffer> frame rate could be

pre-determined.

On the other hand, <Post-trigger buffer> is for users to upload certain

amount of images after motion event occurs.

Содержание ALL2285
































































Результаты поиска

Содержание ALL2285

Отзывы:

Похожие инструкции для ALL2285

Бренды по названию

Популярные бренды

Allnet ALL2285, Руководство пользователя

Результаты поиска

Содержание ALL2285

Отзывы:

Похожие инструкции для ALL2285

Бренды по названию

Популярные бренды