ALL126AS3
USER’S MANUAL
44
Remote Mode:
Specify the IP address and UDP port number for log transfer using syslog.
Local and Remote Mode:
This supports both options mentioned above.
Filter Level
The user can apply one of the following filters to record logging above the specified level. Click on
<SAVE CHANGES> button for applying the log level selection.
Default:
The default pre-selected levels of logs are recorded.
Debug:
Debug and above levels of logs are recorded.
Info:
: Informative and above level of logs are recorded.
Notice:
Notice type and above level of logs are recorded.
Warning:
Warning type and above levels of logs are recorded.
Error:
Error type and above levels of logs are recorded.
Critical:
Critical type and above levels of logs are recorded.
Alert:
Alert type and above level of logs are recorded.
Emerg:
Emergency type of log information is recorded.
View System Log
The user can apply one of the following filters to view specific logs of certain level:
Default:
The default pre-selected levels of logs are viewed.
Debug:
Debug and above levels of logs are viewed.
Info:
Informative and above level of logs are viewed.
Notice:
Notice type and above level of logs are viewed.
Warning:
Warning type and above levels of logs are viewed.
Error:
Error type and above levels of logs are viewed.
Critical:
Critical type and above levels of logs are viewed.
Alert:
Alert type and above level of logs are viewed.
Emerg:
Emergency type of log information is viewed.
Click
Save Changes
to configure the system log settings.
Click
View Log
to fetch the logs in browser.
When you click
View log
button, a screen is displayed as shown in
Figure 4.3.7.1
. This screen is an example of system log of default
level as shown in the browser.
Содержание ALL126AS3
