Allnet ALL126AS3, Руководство пользователя

Страница: 134 / 262

ALL126AS3
USER’S MANUAL
133
Fields in Packet Filtering:
Field Description
IPV4/IPv6 Choose the appropriate tab to configure.
Enable Packet Filter
To enable or disable the Packet Filter feature of ALL126AS3 CPE. To enable, select
the check box.
Source IP
Filter IP Address range of the local machine under ALL126AS3 CPE.
Source Port Filter Port number range of the local machine under ALL126AS3 CPE.
Destination IP IP address of the destination.
Destination Port Port address of the destination.
Protocol Filter protocol. (TCP or UDP).
Ingress Interface Input interface of the packet.
Egress Interface
Output interface of the packet.
Source MAC Address Source MAC Address of packet originating host.
Enable To provide more IP Addresses of the WAN interface.
Add
On pressing Add button, the screen shown in Figure 4.9.3.1 is displayed for adding a
new packet filtering rule in system.
Delete All To delete all the packet filtering rules configured in system.

Click Apply at any time during configuration to save the information that you have entered.

Click CANCEL to exit from this page without saving the changes.
When you have chosen IPv4 tab, and click Add button in the Packet Filtering page, a screen is displayed as shown
in Figure 104. If. you choose IPv6 tab and click on Add button, a screen is displayed as shown in Figure 4.9.3.2.