manualshive.com logo in svg

Allmatic B.RO X40 DISPLAY, Инструкция по эксплуатации

Поделиться
Скачать
Allmatic B.RO X40 DISPLAY Скачать руководство пользователя страница 38

18/20

6-1620020             rev.2             10/01/2019

ITA

ENG

FRA

ESP

DEU

POR

ENG

9.3.1 - ENTER SETTING STEP BY STEP
• 

 Wired input 1:

1. 

Press and hold MENU button for at least 1 second.

2.  Select the item of the menu 

param

 and confirm the selection by pressing the MENU button for at least 1 second. 

3.  Select the item of the menu 

Input

 and confirm the selection by pressing the MENU button for at least 1 second.

4.  Select the item of the menu 

I01

 and confirm the selection by pressing the MENU button for at least 1 second.

5.  To modify the 

Funt

 parameter, press and hold the MENU button for at least 1 second.

6.  Set the 

Funt

 parameter to 

F03

 and confirm by pressing the MENU button for at least 1 second.

7. 

Press briefly the MENU button for 2 times to quit the 

Input

 menu.

8.  Select the item of the menu 

rtime

 and confirm the selection by pressing the MENU button for at least 1 second.

9.  Select the item of the menu 

r01

 and confirm the selection by pressing the MENU button for at least 1 second.

10.  Select the item of the menu 

LIfe

 and confirm the selection by pressing the MENU button for at least 1 second.

11.  Set the parameter to 

1

 (1 second) and confirm by pressing the MENU button for at least 1 second.

12.  Select the item of the menu 

dLy

 and confirm the selection by pressing the MENU button for at least 1 second.

13.  Set the parameter to 

30

 (30 seconds) and confirm by pressing the MENU button for at least 1 second.

14. 

Press briefly the MENU button for 4 times to quit the menu.

• 

Wired input 2:

1. 

Press and hold the MENU button for at least 1 second.

2.  Select the item of the menu 

param

 and confirm the selection by pressing the MENU button for at least 1 second. 

3.  Select the item of the menu 

Input

 and confirm the selection by pressing the MENU button for at least 1 second.

4.  Select the item of the menu 

I02

 and confirm the selection by pressing the MENU button for at least 1 second.

5.  To modify the 

Funt

 parameter, press and hold the MENU button for at least 1 second.

6.  Set the 

Funt

 parameter to 

F00

 and confirm by pressing the MENU button for at least 1 second.

7. 

Press briefly the MENU button for 4 times to quit the menu.

• 

Wired input 3:

1. 

Press and hold the MENU button for at least 1 second.

2.  Select the item of the menu 

param

 and confirm the selection by pressing the MENU button for at least 1 second. 

3.  Select the item of the menu 

Input

 and confirm the selection by pressing the MENU button for at least 1 second.

4.  Select the item of the menu 

I03

 and confirm the selection by pressing the MENU button for at least 1 second.

5.  To modify the 

Funt

 parameter, press and hold the MENU button for at least 1 second.

6.  Set the 

Funt

 parameter to 

F02

 and confirm by pressing the MENU button for at least 1 second.

7. 

Press briefly the MENU button for 2 times to quit the 

Input

 menu.

8.  Select the item of the menu 

rtime

 and confirm the selection by pressing the MENU button for at least 1 second.

9.  Select the item of the menu 

r03

 and confirm the selection by pressing the MENU button for at least 1 second.

10.  Select the item of the menu 

LIfe

 and confirm the selection by pressing the MENU button for at least 1 second.

11.  Set the parameter to 

1800

 (30 minutes) and confirm by pressing the MENU button for at least 1 second.

12. 

Press briefly the MENU button for 4 times to quit the menu.

• 

Wired input 4:

1. 

Press and hold the MENU button for at least 1 second.

2.  Select the item of the menu 

param

 and confirm the selection by pressing the MENU button for at least 1 second. 

3.  Select the item of the menu 

Input

 and confirm the selection by pressing the MENU button for at least 1 second.

4.  Select the item of the menu 

I04

 and confirm the selection by pressing the MENU button for at least 1 second.

5.  To modify the 

Funt

 parameter, press and hold the MENU button for at least 1 second.

6.  Set the 

Funt

 parameter to 

F02

 and confirm by pressing the MENU button for at least 1 second.

7. 

Press briefly the MENU button for 2 times to quit the 

Input

 menu.

8.  Select the item of the menu 

rtime

 and confirm the selection by pressing the MENU button for at least 1 second.

9.  Select the item of the menu 

r04

 and confirm the selection by pressing the MENU button for at least 1 second.

10.  Select the item of the menu 

LIfe

 and confirm the selection by pressing the MENU button for at least 1 second.

11.  Set the parameter to 

43200

 (12 hours) and confirm by pressing the MENU button for at least 1 second.

12. 

Press briefly the MENU button for 4 times to quit the menu.

• 

Learning and setting of the default transmitter with 4 channels:

NOTE: the setting of the default transmitter is necessary only for the first remote control.

1. 

Press and hold the MENU button for at least 1 second.

2.  Select the item of the menu 

Modif

 and confirm the selection by pressing the MENU button for at least 1 second.

3.  Select the item of the menu 

Pdef

 and confirm the selection by pressing the MENU button for at least 1 second.

4.  Select the item of the menu 

btn

 and confirm the selection by pressing the MENU button for at least 1 second.

5.  Select the item of the menu 

b01

 and confirm the selection by pressing the MENU button for at least 1 second.

6.  Select the item of the menu 

f00

 and confirm the selection by pressing the MENU button for at least 1 second.

7.  Enable the key in the 

CH

:

01

 output and confirm the selection by pressing the MENU button for at least 1 second.

8.  Disable the key in the 

CH02

 output and confirm the selection by pressing the MENU button for at least 1 second.

9.  Disable the key in the 

CH03

 output and confirm the selection by pressing the MENU button for at least 1 second.

10.  Disable the key in the 

CH04

 output and confirm the selection by pressing the MENU button for at least 1 second.

11.  Select the item of the menu 

Pdef

 and confirm the selection by pressing the MENU button for at least 1 second.

12.  Select the item of the menu 

btn

 and confirm the selection by pressing the MENU button for at least 1 second.

13.  Select the item of the menu 

b02

 and confirm the selection by pressing the MENU button for at least 1 second.

14.  Select the item of the menu 

f00

 and confirm the selection by pressing the MENU button for at least 1 second.

Содержание B.RO X40 DISPLAY

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды