3/20
6-1620020 rev.2 10/01/2019
ITA
ENG
FRA
ESP
DEU
POR
ENG
3
Make sure that the receiver is out from any menu.
The display shows:
Press briefly the UP (+) button.
The display shows:
Press a key of the transmitter.
The display shows the position in the memory, for example:
The display shows:
Otherwise, if the remote is already memorized, a new learning
restores
the
transmitter to the default values and the display shows:
The receiver waits for a new transmitter.
The display shows:
To quit, press briefly the UP (+) button or wait 10s of inactivity.
The device has available 3 modality for the learning of a transmitter:
•
Default learning - press briefly the UP (+) button for the activation.
•
Sequential learning - press briefly the DOWN (-) button for the activation.
•
Advanced learning - press briefly the MENU button for the activation.
ATTENTION:
outputs are disabled during the learning.
3.1 - DEFAULT LEARNING
The default learning memorizes all keys of a remote control with a single press of a key.
The memorized transmitter will have the same settings of the default transmitter. The default transmitter is stored in the memory
and his parameters could be personalized inside the
modif
menu with the selection of the
pdef
position (see paragraph
4.2
).
If the remote is already memorized, a new learning
restores
the transmitter to the default values.
The receiver exits from the learning phase after 10 seconds of inactivity or with the press of the UP (+) button.
LEARNING OF A TRANSMITTER
NOTE.
The default transmitter leaves the factory with the following settings:
- Key 1 (
b01
) activates OUT1 output (
CH01
) with dead man function (
F00
).
- Key 2 (
b02
) activates OUT2 output (
CH02
) with dead man function (
F00
).
- Key 3 (
b03
) activates OUT3 output (
CH03
) with dead man function (
F00
).
- Key 4 (
b04
) activates OUT4 output (
CH04
) with dead man function (
F00
).
- Keys from 5 to 16 (
b05
...
b16
) are with dead man function (
F00
), but they are not associated to any outputs.
ATTENTION:
with the default learning, B.RO OVER and TECH3 PLUS transmitters are associated to outputs in this way:
- Upper key (
b01
) activates OUT1 output (
CH01
) with dead man function (
F00
).
- Central key (
b03
) activates OUT3 output (
CH03
) with dead man function (
F00
).
- Lower key (
b02
) activates OUT2 output (
CH02
) with dead man function (
F00
).
Содержание B.RO X40 DISPLAY
