Allied HO-PAC 1000 Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 50

Allied HO-PAC 1000 Series Скачать руководство пользователя страница 5

1000 Series Ho-Pac

1

SECTION 1.0

INTRODUCTION

Ho-Pac Technical Manual: Part Number 103376

This Technical Manual is applicable to Ho-Pac models: 1000 series

Serial Numbers: 1000 and Above

Years of Manufacture: 2004 and Above

Serial Number(s)__________________________________ (Model and serial numbers are
located on the ID Plate mounted on the Ho-Pac as shown in Section 4.4 Decal, Lifting and
Lubrication Diagrams.)

This manual contains important
information for the safe use and
maintenance of the Allied Ho-Pac. Read
this manual thoroughly before installing,
operating or servicing the Ho-Pac. This
manual must be easily accessible to
operators, or service and transport
personnel. Store this manual in a
convenient location.

Pay careful attention to all instructions and
follow all governing regulations. Operation
or service other than in accordance with
these instructions may subject the Ho-Pac
to conditions beyond its design capability.
Improper operation, service or the use of
non-Allied parts may result in Ho-Pac
failure or personnel injury.

1.1 Safety Information

When using the Ho-Pac, safety procedures
must be followed. See Section 6.0 for
further safety guidelines.

Pay particular attention to WARNINGS
and CAUTIONS, identified with this
symbol. (

!!

)

These instructions are important for
personnel safety and full service life of the
Ho-Pac. Follow them carefully.

1.2 Warranty Information

Warranty coverage of the Allied Ho-Pac is
contingent upon proper maintenance and
operation of the Ho-Pac as detailed in this
manual. Improper maintenance or
operation shall void Ho-Pac warranty
coverage.

Immediately upon receipt of the Ho-Pac,
read all Allied warranty documents
delivered with the unit for a thorough
understanding of warranty coverage.

Record the Ho-Pac Serial Number in the
space provided above.

1.3 Allied Product Policies

Allied reserves the right to make
modifications to the design or changes to
the specifications without prior notice.

In this manual, Allied recommends Ho-Pac
applications, maintenance and service

«
...
3
4
5
6
7
...
»

Содержание HO-PAC 1000 Series



















































Отзывы:

Нет отзывов