Allied HO-PAC 1000 Series Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 50

Allied HO-PAC 1000 Series Скачать руководство пользователя страница 18

1000 Series Ho-Pac

14

SECTION 5.0

MOUNTING INFORMATION

5.1 USF Mounting

Allied USF mounting kits include all the
components necessary for the mechanical
installation of the USF style Ho-Pac. A
typical kit consists of two mounting pins,
four flange bushings or collars, and pin
retaining hardware. Mounting kits are
purchased separately.

Flange

Bushing

Spacer

Sleeve

Bushing

Pin

Mounting

Possible Configurations.

All components are installed inside the HoPac frame.

These items may be included with Mounting Kit.

Since the pin center-to-center distance is
fixed, quick couplers may not be possible
when using the USF configuration. The
following illustration shows the contents of
a typical USF Mounting Kit.

5.3 BR or SR Mounting

The flat top style Ho-Pac is mounted to a
specific carrier by using an adapter bracket
that is bolted to the Ho-Pac top plate.
Brackets are available for either mounting
type and are designed to match the carrier
requirements. A typical bracket is shown
below.

5.2 BSF Mounting

Allied BSF mounting kits include all the
components necessary for the mechanical
installation of the BSF style Ho-Pac. The
kit is supplied in one of the configurations
shown below.

In configurations #2, 3, 4, 5 & 6, the kit
includes bushings that fit into the carrier
stick and link. These bushings are
necessary to adapt to the smaller diameter
pins supplied in the kit.

«
...
16
17
18
19
20
...
»

Содержание HO-PAC 1000 Series



















































Отзывы:

Нет отзывов