Allied Vision Goldeye CL-033 SWIR, Техническое руководство

Страница: 139 / 212

Camera interfaces
139 Goldeye G/CL Technical Manual V4.1.1
Power supply
Depending on the model, various options are available to provide Goldeye cameras
with power. Table 94 lists the options available for all Goldeye models. All Goldeye
models do not work in reverse polarity. Refer also to Table 108 and
Table 109 on
page 157 for details of pin assignment for each connector.
Power supply via Hirose connector
For stabilized Goldeye models (using the I/O port)
Use one of the following connections.
•
Power supply with Hirose 12-pin connector
• I/O cable with Hirose 12-pin connector in conjunction with a standard power
supply adapter
For cooled Goldeye models (using the power port)
Use one of the following connections:
Goldeye model Hirose PoE
G-008 TEC1,
G-032 TEC1,
G-033 TEC1,
G-033 TECless Through the Hirose I/O port, via Pin 1,
External GND , and Pin 2, External
Power.
Through the Gigabit Ethernet port by a
PoE (802.3af/at) supported network
card, switch, or injector.
G-008 Cool TEC1 Through the Hirose 4-pin power port,
using all four pins of the connector.
These models do not use pin 2 of the
12-pin Hirose I/O port. Through the Gigabit Ethernet port by a
PoE (802.3af/at) supported network
card, switch, or injector.
G-032 Cool TEC2 Through the Hirose 4-pin power port,
using all four pins of the connector.
These models do not use pin 2 of the
12-pin Hirose I/O port. Through the Gigabit Ethernet port by a
PoE+ (802.3at) supported network
card, switch, or injector.
CL-008 TEC1,
CL-032 TEC1,
CL-033 TEC1,
CL-033 TECless Through the Hirose I/O port, via Pin 1,
External GND , and Pin 2, External
Power.
(n/a)
CL-008 Cool TEC1
CL-032 Cool TEC2 Through the Hirose 4-pin power port,
using all four pins of the connector.
These models do not use pin 2 of the
12-pin Hirose I/O port. (n/a)
Table 94: Differences in power supply between various Goldeye models.