manualshive.com logo in svg

Allied Vision Technologies Goldeye CL-008 SWIR, Техническое руководство

Техническое описание Allied Vision Technologies Goldeye CL-008 SWIR включает в себя подробное руководство, которое можно скачать бесплатно с manualshive.com. Этот мануал предоставляет всю необходимую информацию для правильной эксплуатации и настройки устройства, обеспечивая максимальную производительность и качество изображения.

Поделиться
Скачать
background image

Appendix

Goldeye Technical Manual

 

V2.2.0

86

                  correction. Changing this parameter or the contents of the
                  specified files may void ex factory calibration.
                    0           : No loading of any correction image. The
                                  memory content remains uninitialized at
                                  startup.
                    01..EF      : The correction data is loaded from the
                                  indicated file. In case that the following
                                  number also exists within the flash, it is
                                  loaded into a second page of the correction
                                  memory. The actually data page for correction
                                  is selected depending on the grabber's CC2
                                  signal state.

D=<p8>          : File number of the data for the 12-bits-LUT. Changing this
                  parameter or the contents of the specified files may void ex
                  factory calibration.
                    0           : No LUT data is loaded. The memory content
                                  remains uninitialized at startup.
                    01..EF      : The correction data is loaded from the
                                  indicated file.

E=<p8>          : Operation mode of the two point correction (Gain Offset
                  Correction). Changing this parameter may void ex factory
                  calibration.
                    0           : Deactivated. Image data is passed through
                                  transparently.
                    1           : Two point correction activated. Correction
                                  data A and B with set values J and K of the
                                  actual correction memory page S are employed.
                    2           : Two point correction deactivated. Test mode:
                                  Correction data A is output as image data.
                    3           : Two point correction deactivated. Test mode:
                                  Correction data B is output as image data.
                    4           : One point correction: Simple subtraction of
                                  the correction data A from the input data.
                                  In addition the set value J is added as
                                  offset to each pixel value.
                    5           : One point correction: Simple subtraction of
                                  the correction data B from the input data.
                                  In addition the set value K is added as
                                  offset to each pixel value.

F=<p8>          : Operation mode of the bad pixel correction.
                    0           : Deactivated. Image data is passed through
                                  transparently.
                    1           : Activated. Correction data C is employed.
                    2           : Deactivated. Test mode: Data output
                                  controlled by L=<p8>(*).

G=<p8>          : Operation mode of the LUT. Changing this parameter may void
                  ex factory calibration.
                    0           : Deactivated. Image data is passed through
                                  transparently.
                    1           : Activated.
                    2           : Deactivated. Test mode: LUT data is output
                                  sequentially.

H=<p8>          : Operation mode of the integrator / image store. This module

Содержание Goldeye CL-008 SWIR



































































































Отзывы:

Нет отзывов

Похожие инструкции для Goldeye CL-008 SWIR

Manfrotto 475 Instructions preview
475
Бренд: Manfrotto Страницы: 2
Abus TVIP42562 User Manual preview
TVIP42562
Бренд: Abus Страницы: 353
Abus HDCC81000 User Manual preview
HDCC81000
Бренд: Abus Страницы: 110
Abus PPIC32020 User Manual preview
PPIC32020
Бренд: Abus Страницы: 33
Abus TVHD75500 Quick Manual preview
TVHD75500
Бренд: Abus Страницы: 99
Tamron A16 Owner'S Manual preview
A16
Бренд: Tamron Страницы: 8
Campbell CC5MPX 6HULHV User Manual preview
CC5MPX 6HULHV
Бренд: Campbell Страницы: 116
QIMMIQ SPLASH DRONE 3 Safety Manualline preview
SPLASH DRONE 3
Бренд: QIMMIQ Страницы: 16
Xblitz Dual Core Manual preview
Dual Core
Бренд: Xblitz Страницы: 12
Olympus Camedia D-575ZOOM Basic Manual preview
Camedia D-575ZOOM
Бренд: Olympus Страницы: 180
Olympus Camedia D-575ZOOM Quick Start Manual preview
Camedia D-575ZOOM
Бренд: Olympus Страницы: 2
Canon EOS Rebel T3 18-55mm IS II Kit Quick Reference Manual preview
EOS Rebel T3 18-55mm IS II Kit
Бренд: Canon Страницы: 2
Olympus CAMEDIA C-60 Zoom Quick Start Manual preview
CAMEDIA C-60 Zoom
Бренд: Olympus Страницы: 2
Canon PowerShot A495 User Manual preview
PowerShot A495
Бренд: Canon Страницы: 132
Olympus CAMEDIA C-5500 Sport Zoom Quick Start Manual preview
CAMEDIA C-5500 Sport Zoom
Бренд: Olympus Страницы: 2
Olympus FE 370 - Digital Camera - Compact Manuel D'Instructions preview
FE 370 - Digital Camera - Compact
Бренд: Olympus Страницы: 70
Olympus FE 370 - Digital Camera - Compact Manual De Instruções preview
FE 370 - Digital Camera - Compact
Бренд: Olympus Страницы: 70
Olympus FE-330 Instruction Manual preview
FE-330
Бренд: Olympus Страницы: 68

Бренды по названию

Популярные бренды

Загрузить еще бренды