C613-50152-01 Rev C
Command Reference for IX5-28GPX
346
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
L
OGGING
C
OMMANDS
LOG
PERMANENT
(
FILTER
)
log permanent (filter)
Overview
This command creates a filter to select messages to be sent to the permanent log.
Selection can be based on the priority/ severity of the message, the program that
generated the message, the logging facility used, a sub-string within the message
or a combination of some or all of these.
The
no
variant of this command removes the corresponding filter, so that the
specified messages are no longer sent to the permanent log.
Syntax
log permanent [level
<level>
] [program
<program-name>
]
[facility
<facility>
] [msgtext
<text-string>
]
no log permanent [level
<level>
] [program
<program-name>
]
[facility
<facility>
] [msgtext
<text-string>
]
Parameter
Description
level
Filter messages sent to the permanent log by severity level.
<
level
>
The minimum severity of message to send. The level can be specified as one of the following
numbers or level names, where 0 is the highest severity and 7 is the lowest severity:
0|emergencies
System is unusable
1|alerts
Action must be taken immediately
2|critical
Critical conditions
3|errors
Error conditions
4|warnings
Warning conditions
5|notices
Normal, but significant, conditions
6|informational
Informational messages
7|debugging
Debug-level messages
program
Filter messages by program. Include messages from a specified program.
<
program-
name
>
The name of a program to log messages from, either one of the following predefined program
names (not case-sensitive), or another program name (case-sensitive) that you find in the log
output:
rsvp
Resource Reservation Protocol (RSVP)
dot1x
IEEE 802.1X Port-Based Access Control
lacp
Link Aggregation Control Protocol (LACP)
stp
Spanning Tree Protocol (STP)
rstp
Rapid Spanning Tree Protocol (RSTP)
mstp
Multiple Spanning Tree Protocol (MSTP)
imi
Integrated Management Interface (IMI)
imish
Integrated Management Interface Shell (IMISH)