manualshive.com logo in svg

Allied Telesis IX5-28GPX, Справочник по командам, Страница: 1834 / 2231

Поделиться
Скачать
Allied Telesis IX5-28GPX Скачать руководство пользователя страница 1834

C613-50152-01 Rev C

Command Reference for IX5-28GPX

1834

AlliedWare Plus™ Operating System - Version 5.4.7-0.x

A

LLIED

 T

ELESIS

 M

ANAGEMENT

 F

RAMEWORK

™ (AMF) C

OMMANDS

SWITCHPORT

 

ATMF

-

LINK

switchport atmf-link

Overview

This command enables you to configure a port or aggregator to be an AMF 
up/down link. Running this command will automatically place the port or 
aggregator into trunk mode.

Use the 

no

 variant of this command to remove any AMF-link that may exist for the 

selected port or aggregated link.

Syntax

switchport atmf-link

no switchport atmf-link

Mode

Interface Configuration for a switchport, a static aggregator or a dynamic channel 
group.

Usage

Up/down links and virtual links interconnect domains in a vertical hierarchy, with 
the highest domain being the core domain. In effect, they form a tree of 
interconnected AMF domains. This tree must be loop-free. Therefore, you must 
configure your links so that no rings are formed only from up/down links and/or 
virtual links.

Within each domain, cross-links between AMF nodes define those nodes as 
siblings within the same domain. You can form rings by combining cross-links with 
up/down links and/or virtual links, as long as each AMF domain links upwards to 
only a single parent domain. Each domain may link downwards to multiple child 
domains.

Do not use a VCStack port as an AMF link, even if you have configured the port as 
a data port. During AMF recovery, these ports revert to their default state of being 
VCStack ports, so AMF cannot use them for recovery. Use a standard front-panel 
data port instead.

Example

To make a switchport 1.0.1 an AMF up/down link, use the following commands:

Node_1# 

configure terminal

Node_1(config)# 

interface port1.0.1

Node_1(config-if)# 

switchport atmf-link

Содержание IX5-28GPX
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов