Allied Telesis Formula 8200, Руководство по установке

Страница: 15 / 28

FORMULA 8200 Fiber Switch Installation Guide
11
Connecting Devices to the Fiber Ports
Connect the switch to any equipment that conforms to IEEE 802.3u standard,
such as Ethernet networking devices, workstations, servers, other full duplex
switches, or bridges that support 100Base FX.
1. Remove the dust caps only from the FX ports you intend to use.
Caution
Always leave the dust caps on unused ports to protect the fiber ports
from dust.
2. Connect devices to the ports, one at a time (Figure 8).
Figure 8: Attaching Fiber Cables to the FX Ports
Dual SC cable connectors are keyed so you can insert them only one
way. If your cable is not keyed, note that the Receive cable is on the
right and the Transmit cable is on the left.
3. Verify the correct link and status condition for every port-to-device
connection before proceeding to the next connection. See Table 1 for a
description of port LED activity.
4. Attach additional networking cables as appropriate.
Where to Go Next
Go to Allied Telesyn’s website at www.alliedtelesyn.com/manuals.htm and
download the following documents:
❑
FORMULA 8200 User’s Guide for the commands to configure and
monitor the switch
❑
FORMULA 8200 Software Release Notes for the latest information on
your switch software version
Fiber_Book Page 11 Tuesday, February 17, 1998 1:43 PM