Allied Telesis Formula 8200, Руководство по установке

Страница: 11 / 28

FORMULA 8200 Fiber Switch Installation Guide
7
Figure 6: FORMULA 8200 POST Messages
4. Observe the LEDs for normal switch operation (Figure 7 and Table 1).
Figure 7: Close-Up of the FX Port LEDs
Boot POST in progress...
PROM version: 1.0.10
Sizing DRAM (value displayed is bank size or error
code)...
DRAM now configured into a contiguous block:
Address: ............. 0xa0000000 - 0xa07ffffc
Running DRAM test...
Initializing 4650 icache and dcache...
Initializing PIG chip...
Initializing PMIU chips...
.
.
Boot POST complete, passing control to firmware...
Loading /flash/firmware...Starting at 0x80010000...
Firmware version 1.4.0
Date= 11/7/97 time= 11:34:27
Restore configuration for system
IP address = 0.0.0.0
Number of ports = 16
Configuration changed
srm_init success
Allied Telesyn International Corp.
Copyright@ 1997 Allied Telesyn All rights reserved.
Switch Init Success
Login:
Post
begins
Component
tests
Firmware
loads
System
info
Vendor
info
Activity
Collision
Link
Diag
Fiber_Book Page 7 Tuesday, February 17, 1998 1:43 PM