Allied Telesis AT-VP504E FXS Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 112

Allied Telesis AT-VP504E FXS Скачать руководство пользователя страница 9

AT-VP504E FXO

1

1

Introducing the AT-VP504E FXO

This chapter introduces the AT-VP504E FXO. It describes the
AT-VP504E FXO’s main features and illustrates its front panel
indicators and back panel connectors.

Overview

The AT-VP504E FXO is an analog gateway that allows connectivity
between the PSTN and a VoIP network. This way, an IP-based
telephony system can be linked to the PSTN world through up to four
(4) standard telephone lines. The AT-VP504E FXO devices are
stackable so the number of telephone lines that are required can be
easily met by adding more devices in the network.

Why use the
AT-VP504E
FXO?

Merges voice and data traffic onto a single unified
network.

Carrying telephone traffic over data networks uses less
bandwidth (as compared to telephone trunks), resulting in a
more cost-effective network solution.

Easily integrates with existing telephone equipment.

Overhead is minimal, because the AT-VP504E FXO
gateways fully utilize your existing telecommunications
equipment and computer networks.

Bypasses long-distance toll charges for realized savings.

Supports 10 Mb/s and 100 Mb/s Ethernet networks.

Upgrades software easily for future enhancements.

Uses the latest standards in Internet Telephony.

•

H.323 protocol for call management

•

Real-Time Transport Protocol (RTP) for voice
streaming

Supports the following Codecs:

•

G.711 (µ-law, A-law)

•

G.723.1 (5.3 kbps and 6.4 kbps)

Supports Quality of Service technologies.

•

Differentiated Services (DS) Field

•

IEEE 802.1q user priority tagging

«
...
7
8
9
10
11
...
»

Содержание AT-VP504E FXS

















































































































Отзывы:

Нет отзывов