MAC Control
The Router provides two MAC Address Control features for up to 32 MAC addresses:
l
Fixed IP Mapping – This will assigned a fixed IP address to a specified client (by MAC address)
l
Connection Control – This allows or denies clients to connect to this device and the Internet.
Select MAC Control from under Security Settings in the left hand window
Figure 25. MAC Address Control.
MAC Address Control: ‘Enable’ if you want the Router to perform MAC Address Control.
Connection Control: ‘Enable’ if you want the Router to ‘allow’ or ‘block’ Clients from connecting to the Internet.
Choose "allow" or "deny" to allow or deny clients whose MAC addresses are not listed in the "Control table".
MAC Address: Indicates a specific client's MAC address.
IP Address: Expected IP address of the corresponding client. Leave it blank if you don't want to assign a specified IP
address to the corresponding client.
C: When "Connection control" is enabled, checking "C" will allow the corresponding client to "Connect" to this device.
42
