
This illustration figure 1, shows the front and rear panels of the router.
Figure 1. Router front and rear panels.
LED
Colour
Function/Description
Power
Green
Steady on when power is on.
Status
Orange
Flashing in normal operation
WAN (WAN port)
Link/Act
Green
Steady on when ADSL/Cable modem is properly connected
Flashing when WAN port has data traffic
100M
Green
Steady on when WAN port connected at 100Mbps
Off – when WAN port connected at 10Mbps
LAN (1-4 LAN ports)
Link/Act
Green
Steady on when LAN port is properly connected
Flashing when LAN port has data traffic
100M
Green
Steady on when LAN port connected at 100Mbps
Off – when LAN port connected at 10Mbps
Init.
Press and hold the Initialize button.The Status LED will stop flashing, and then flash 6 times. Then
release the button.
WAN.
This port is for connecting to the Wide Area Network using an ADSL or Cable Modem.
LAN 1- 4.
These ports are used to connect computers and peripherals to the router.
Power.
This socket is used to connect the external power supply to the router.
WAN
1
POWER
SPEED
LINK
STATUS
4
3
2
1
2
3
4
WAN
Init
Power
16