Chapter 3
Configuration Wizard
The router features a Web-based management wizard.This allows the router to be quickly and easily programmed.
Web Interface
Note
The Web browser software (Netscape Communicator and Microsoft Internet Explorer) are included in the CD shipped
with the router. The browsers can also be downloaded from Netscape Communications’ web site at
<http://www.netscape.com> and Microsoft’s web site at <http://www.microsoft.com>.
The router is pre-configured from the factory with the default IP address 192.168.123.254.
1.
Start your web browser on a workstation that has the TCP/IP protocol. (The workstation and the router must
be on the same IP subnet.)
2.
Type the router’s IP address in the URL field. For example: http://192.168.123.254 and press Enter.
The router’s default IP address 192.168.123.254. If the IP address of the router has been changed, then enter the cur-
rent one.
The Login window shown in Figure 5 is displayed.
Figure 5. Login Window
3.
Do not type anything into the Password field and click OK.
Note
The router is factory-configured with the default password left blank. The Introduction page is displayed. You can start
configuring the router.
4.
Click the Wizard item in the left-side window to start the utility.
22