manualshive.com logo in svg

Allied Telesis AT-9000/28, Руководство пользователя

Перед вами сетевой коммутатор Allied Telesis AT-9000/28. Для ознакомления с полными функциональными возможностями этого устройства, загрузите бесплатное руководство пользователя с нашего веб-сайта. В этом руководстве вы найдете всю необходимую информацию для правильной настройки и использования данного продукта. Скачать можно на manualshive.com.

Поделиться
Скачать
background image

Copyright

Copyright © 2011, Allied Telesis, Inc.
All rights reserved.
This product includes software licensed under the BSD License. As such, the following language applies for those 
portions of the software licensed under the BSD License:
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following 
conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the following 

disclaimer.

* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following 

disclaimer in the documentation and/or other materials provided with the distribution.

* Neither the name of Allied Telesis, Inc. nor the names of the respective companies above may be used to endorse or 

promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY 
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY 
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Copyright 1989, 1991, 1992 by Carnegie Mellon University. Derivative Work - 1996, 1998-2000. Copyright 1996, 1998-
2000 by The Regents of the University of California - All rights reserved. Copyright (c) 2001-2003 by Networks 
Associates Technology, Inc. - All rights reserved. Copyright (c) 2001-2003 by Cambridge Broadband Ltd. - All rights 
reserved. Copyright (c) 2003 by Sun Microsystems, Inc. -  All rights reserved. Copyright (c) 2003-2005 by Sparta, Inc. - 
All rights reserved. Copyright (c) 2004 by Cisco, Inc. and Information Network Center of Beijing University of Posts and 
Telecommunications. - All rights reserved. Copyright (c) 2003 by Fabasoft R&D Software GmbH & Co KG - All rights 
reserved. Copyright (c) 2004-2006 by Internet Systems Consortium, Inc. ("ISC") - All rights reserved. Copyright (c) 
1995-2003 by Internet Software Consortium  - All rights reserved. Copyright (c) 1992-2003 by David Mills - All rights 
reserved. Copyright (c) 1995 by Tatu Ylonen <[email protected]>, Espoo, Finland - All rights reserved. Copyright (c) 1998 
by CORE SDI S.A., Buenos Aires, Argentina - All rights reserved. Copyright 1995, 1996 by David Mazieres - All rights 
reserved. Copyright 1983, 1990, 1992, 1993, 1995 by The Regents of the University of California - All rights reserved. 
Copyright (c) 1995 Patrick Powell - All rights reserved. Copyright (c) 1998-2005 The OpenSSL Project - All rights 
reserved. Copyright (C) 1995-1998 Eric Young ([email protected]) - All rights reserved. Copyright (c) 2008, Henry 
Kwok - All rights reserved. Copyright (c) 1995, 1998, 1999, 2000, 2001 by Jef Poskanzer <[email protected]>. - All 
rights reserved.
Some components of the SSH software are provided under a standard 2-term BSD license with the following names as 
copyright holders: Markus Friedl, Theo de Raadt, Niels Provos, Dug Song, Aaron Campbell, Damien Miller, Kevin 
Steves, Daniel Kouril, Wesley Griffin, Per Allansson, Nils Nordman, and Simon Wilkinson, 
Portable OpenSSH includes code from the following copyright holders, also under the 2-term BSD license: Ben 
Lindstrom, Tim Rice, Andre Lucas, Chris Adams, Corinna Vinschen, Cray Inc., Denis Parker, Gert Doering, Jakob 
Schlyter, Jason Downs, Juha Yrjola, Michael Stone, Network Associates, Solar Designer, Todd C. Miller, Wayne 
Schroeder, William Jones, Darren Tucker, Sun Microsystems, The SCO Group. 
Some Portable OpenSSH code is licensed under a 3-term BSD style license to the following copyright holders: Todd C. 
Miller, Theo de Raadt, Damien Miller, Eric P. Allman, The Regents of the University of California, and Constantin S. 
Svintsoff. Some Portable OpenSSH code is licensed under an ISC-style license to the following copyright holders: 
Internet Software Consortium, Todd C. Miller, Reyk Floeter, and Chad Mynhier. Some Portable OpenSSH code is 
licensed under a MIT-style license to the following copyright holder: Free Software Foundation, Inc.
This product also includes software licensed under the GNU General Public License available from: 
http://www.gnu.org/licenses/gpl2.html

Содержание AT-9000/28































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AT-9000/28

E-TOP BR486n User Manual preview
BR486n
Бренд: E-TOP Страницы: 76
Automationdirect.com CLICK PLUS C2-02CPU Quick Start Manual preview
CLICK PLUS C2-02CPU
Бренд: Automationdirect.com Страницы: 10
NETGEAR AC1450 Installation Manual preview
AC1450
Бренд: NETGEAR Страницы: 14
AYRSTONE AyrMesh IndoorAP Instructions preview
AyrMesh IndoorAP
Бренд: AYRSTONE Страницы: 2
Freund FE-W826-T2 Setup Manual preview
FE-W826-T2
Бренд: Freund Страницы: 6
IndigoVision Compact NVR-AS 4000 User Manual preview
Compact NVR-AS 4000
Бренд: IndigoVision Страницы: 38
EMTRUST CP75X User Manual preview
CP75X
Бренд: EMTRUST Страницы: 103
Network Critical SmartNA-X User Manual preview
SmartNA-X
Бренд: Network Critical Страницы: 200
ADTRAN 239 T1 HDSL4 Installation And Maintenance Manual preview
239 T1 HDSL4
Бренд: ADTRAN Страницы: 20
ETAS ES1392.1 User Manual preview
ES1392.1
Бренд: ETAS Страницы: 36
Extron electronics VERSATOOLS MTP User Manual preview
VERSATOOLS MTP
Бренд: Extron electronics Страницы: 19
Rane CP 52S Operator'S Manual preview
CP 52S
Бренд: Rane Страницы: 6
Grizzly PSJ-VZ58 gen3 OEM User Manual preview
PSJ-VZ58 gen3 OEM
Бренд: Grizzly Страницы: 12
Netopia D3100-I User Reference Manual preview
D3100-I
Бренд: Netopia Страницы: 138
Valcom VIP-814 Installation Manual preview
VIP-814
Бренд: Valcom Страницы: 3
3Com OfficeConnect 3CXSH654B User Manual preview
OfficeConnect 3CXSH654B
Бренд: 3Com Страницы: 52
QRS Q-Sync Connection Manual preview
Q-Sync
Бренд: QRS Страницы: 11
M86 Security Web Filter HL User Manual preview
Web Filter HL
Бренд: M86 Security Страницы: 512

Бренды по названию

Популярные бренды

Загрузить еще бренды