22
Standards
: This product meets the following standards.
1
RFI Emission
EN55022 Class A
2
WARNING
: In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
3
Immunity
EN50082-1 1997
4
Electrical Safety
EN60950, UL1950 (UL/CUL)
5
ELECTRICAL NOTICES
WARNING:
ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove the cover. No user-serviceable parts
inside. This unit contains HAZARDOUS VOLTAGES and should only be opened by a
trained and qualified technician. To avoid the possibility of ELECTRIC SHOCK,
disconnect electric power to the product before connecting or disconnecting the LAN
cables.
6
LIGHTNING DANGER
DANGER:
DO NOT WORK on equipment or CABLES during periods of
LIGHTNING ACTIVITY.
7
CAUTION:
POWER CORD IS USED AS A DISCONNECTION DEVICE. TO DE-
ENERGIZE EQUIPMENT, disconnect the power cord.
8
ELECTRICAL - TYPE CLASS 1 EQUIPMENT
THIS EQUIPMENT MUST BE EARTHED. Power plug must be connected to a
properly wired earth ground socket outlet. An improperly wired socket outlet could
place hazardous voltages on accessible metal parts.
9
PLUGGABLE EQUIPMENT, the socket outlet shall be installed near the equipment
and shall be easily accessible.
10
CAUTION:
Air vents must not be blocked and must have free access to the room
ambient air for cooling.
11
OPERATING TEMPERATURE:
This product is designed for a maximum ambient
temperature of 40° degrees C.
12
ALL COUNTRIES:
Install product in accordance with local and National Electrical
Codes.
U.S. Federal Communications Commission
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
this instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or
the FCC, can void your right to operate this equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.