Allied Telesis AT-8116 Скачать руководство пользователя страница 80

Страница: 80 / 88

Software Downloading

A-2

5. Select/Create a directory into which to copy the software file, and

enter this directory.

6. Copy the software file into a file with a suitable name.

7. Set the remote software file using the set-sw-file command.

8. Operate TFTP server on the remote system host and use the sw-

dnld command on the AT-8116 to start download.

8118 TFTP Server Download Procedure

1. Insure that an IP Address is assigned.

2. Set the TFTP mode to the server using the set-tftp-mode

command.

3. Set the remote software file using the set-sw-file command.

4. Insure that the host system for the TFTP client (if AT-8116 is the

TFTP sever, then the host system should be an TFTP client) and AT-
8116 are interconnected.

5. Insert the diskette with the software file into the host drive of the

TFTP client.

6. Select/Create a directory into which to copy the software file, and

enter this directory.

7. Copy the software file into a file with a suitable name.

8. Set the remote software file using the set-sw-file command.

9. Use the sw-dnld command to start download.

10. Operate the remote TFTP client.

11. Select binary transfer mode if the code is in ASCII (equivalent to

octet in UNIX code).

12. Using the TFTP protocol, send the file (to be loaded into Flash

memory) to the IP address of the AT-8116.

Содержание AT-8116

























































































Результаты поиска

Содержание AT-8116

Отзывы:

Похожие инструкции для AT-8116

Бренды по названию

Популярные бренды

Allied Telesis AT-8116, Руководство пользователя

Результаты поиска

Содержание AT-8116

Отзывы:

Похожие инструкции для AT-8116

Бренды по названию

Популярные бренды