AT-8116 User’s Guide
15-3
SNMP Setup
1. Set up the SNMP communities strings for the two access modes:
read and write (see SNMP Commands). Confirm that the read and
write communities were properly accepted. In this example, the
Read community string is public; the Write community string is
private. To set community strings:
SYS_telnet>set-comm read public
New read community is: < public >
SYS_telnet>set-comm write private
New write community is: < private >
SYS_telnet>
to read if accepted:
SYS_telnet>set-comm read public
New read community is: < public >
SYS_telnet>set-comm write private
New write community is: < private >
SYS_telnet>