Product Description
16
Port LEDs and
the LED Mode
Select Button
Figure 5 Port LEDs and the Mode Selection Switch
The port LEDs on the front panel display port status information. Each
port has two LEDs. The Link LED, as described in Table 1 below, indicates
whether there is a valid link between a port and the end node connected
to it.
Each port also has a Mode LED. This LED displays a variety of status
information, including port speed and duplex mode. Use the Mode
Select button to toggle the Mode LEDs to display different status
information. The LEDs next to the Mode Select button indicate the status
being displayed by the port Mode LEDs. For example, if the Mode 100
LED is lit, then the port Mode LEDs are displaying port speed.
Note
Toggling the Mode Selection button does not affect the normal
operations of the switch.
Link
Mode
Link
Mode
100
FULL
ACT
MODE
COL
PORT A
AT-8024GB
10Base-T / 100Base-TX Fast Ethernet Switch
Port LEDs
Mode Select
Button
