manualshive.com logo in svg

Allied Telesis AT-4016F/SC, Руководство по установке, Страница: 40 / 60

Поделиться
Скачать
Allied Telesis AT-4016F/SC Скачать руководство пользователя страница 40

Connectivity

24

Fiber Optic Port

LEDs

The port indicators on the AT-4016F front panel provide visual diagnostic 
and activity information for network analysis. Each Fiber Optic port 
supports the following indicator functions with three front panel LEDs per 
port, arranged in a central bank as shown in Figure 20. 

LINK (Solid Green)—This indicates that the particular port has a valid 
link and is not partitioned.

LINK (Amber)—This indicates that the particular port does not have a 
valid link or it is partitioned.

RECEIVE (Flashing Green)—This indicates that the port is receiving 
Ethernet packets.

COLLISION (Flashing Amber)—This LED will flicker to indicate packet 
collisions. Although occasional collisions are normal in Ethernet networks, 
excessive collisions are an indication of possible segment problems. A 
constantly illuminated Collision LED may indicate that there is a port 
problem, cabling problem, or excessive traffic problem. 

If you believe there are excessive packet collisions, then you are advised to 
consider Omega management for additional information such as the 
amount of transmitted packets instead of collisions.

Figure 20: Port Indicators

Содержание AT-4016F/SC





























































Отзывы:

Нет отзывов