Alliance Laundry Systems UW35S2, Руководство по эксплуатации и программированию

Страница: 30 / 94

Programming
28
F232087
Cycle Segment Charts
(Continued)
Segments 3–7 (Fills 1–5)
Display
Instructions
Use the Up or Down key to change. Press the Start key to enter or advance.
FIL 1, FIL 2, FIL 3, FIL 4, or FIL 5
dRIN or SRIN Select rinse method: “dRIN” (dilution rinse), or “SRIN” (spray rinse)*
00 or 02 to 15 Select segment time: 02 to 15 minutes (00 to skip segment)
HFIL, CFIL, or bFIL Select “HFIL” (hot fill), “CFIL” (cold fill), or “bFIL” (warm fill)**
LOLE or HILE Select fill level: “LOLE” (low), or “HILE” (high) water level**
SUP0–SUP7 Select supply 0–7 (0 for no supply)**†
00°F, 75°F–200°F
00°C, 25°C–93°C
Select temperature: 75 to 200°F or 25 to 93°C (00 for no heat)**‡
SPIn (flashed for one second)
tInE (flashed for one second)
00 or 30 to 120 Select time for spin: 30 to 120 seconds (00 for no spin)
*This is displayed only if spray rinse is enabled in the SETUP options.
**These steps are skipped if spray rinse is enabled in the SETUP options and “SRIN” is selected for
the segment.
†Supply 4 and Supply 7 are available only if Supply 4 is enabled in the SETUP options.
‡This is displayed only if auxiliary heat is enabled in the SETUP options.