Alliance Laundry Systems UW35S2, Руководство по эксплуатации и программированию

Страница: 26 / 94

Programming
24
F232087
Cycle Programming
(Continued)
3. Fill 1–Fill 5 segments only. If the spray
rinse SETUP option is enabled, use the Up
or Down key to select either “SRIN”
(spray rinse) or “dRIN” (dilution rinse).
Press the Start key.
Note:
Do not program spray rinse steps for
machines not equipped with spray rinse.
4. Use the Up or Down key to select the
desired segment time. Set this value to
zero to skip the segment. Press the
Start key.
Note: If the spray rinse SETUP option is
enabled and “SRIN” was selected in step 3, the
computer will skip to step 12.
Note:
The computer does not count down the
remaining cycle time during fills, drains, or
prior to first achieving the programmed heat
temperature when heating. The computer
resumes counting down cycle time once the
programmed fill level is reached, when the
machine has drained, and after a programmed
heat temperature is reached.
5. Use the Up or Down key to select the
desired fill temperature. See the following
table for fill options.
6. Press the Start key.
7. Use the Up or Down key to select the
desired fill level. See the following table.
Note:
If “FLUS” is selected for a prewash
segment, this selection will be skipped for that
segment. The display will skip to step 9 in the
programming process.
8. Press the Start key.
Fill Temperature Options
Display Fill Type
CFIL Cold fill
HFIL Hot fill
bFIL Warm fill
Water Level Options
Display Fill Level
LOLE Low Level
HILE High Level