Alliance Laundry Systems SWD455C SVG страница 47 Скачать руководство пользователя

Страница: 47 / 50

Dryer Symptom

Possible Cause/Solution

Dryer won’t start

• Nonmetered models - Turn timer knob further into cycle.
• Metered models - Insert coin(s).
• Metered models - Activate timer. Push coin slide all the way

in.

• Insert coin(s) or card, if required.
• For dryers equipped with a power cord, make sure the power

cord is plugged all the way into the electrical outlet.

• Make sure loading door is closed.
• Press START pad.
• Make sure the laundry room fuse(s) isn’t blown or loose, or

circuit breakers aren’t open.

• The dryer itself does not have an electrical fuse. An electric

dryer has an electrical circuit with two fuses.

• Check if motor overload protector has cycled. Wait 10 mi-

nutes and try again.

Dryer won’t heat

• Nonmetered models - Turn timer knob further into cycle.
• Metered models - Activate timer. Push coin slide all the way

in.

• Make sure the laundry room fuse(s) isn’t blown or loose, or

circuit breakers aren’t open.

• The dryer itself does not have an electrical fuse. An electric

dryer has an electrical circuit with two fuses.

• Make sure controls are in a HEAT setting.
• Gas dryer only – Make sure equipment and main gas line

valve is turned on.

• Check exhaust duct to outside to see if it is kinked, blocked or

needs cleaning.

• Check weather hood to make sure flapper moves freely, has

not been pushed in or has not been blocked.

Dryer doesn’t dry clothes satisfactorily

• Check exhaust duct to outside to see if it is kinked, blocked or

needs cleaning.

• Check weather hood to make sure flapper moves freely, has

not been pushed in or has not been blocked.

• Clean the lint filter.
• Make sure the load isn’t too small. Small loads may not tum-

ble properly or dry evenly.

• Check load being dried. Heavy items dried with lightweight

items will not dry as quickly as the rest of the load.

Table continues...

Troubleshooting

DO NOT COPY or TRANSMIT

Part No. 805419R3

Содержание SWD455C SVG



















































Результаты поиска

Содержание SWD455C SVG

Отзывы:

Похожие инструкции для SWD455C SVG

Бренды по названию

Популярные бренды

Alliance Laundry Systems SWD455C SVG, Руководство по установке и эксплуатации

Результаты поиска

Содержание SWD455C SVG

Отзывы:

Похожие инструкции для SWD455C SVG

Бренды по названию

Популярные бренды